Sub12
SubwooferBuy nowADAM Audio Sub12
The Sub12 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 22 Hz.
A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.
The Sub12 subwoofer provides a precise combination of low cutoff frequency (-3dB at 22Hz) and an undistorted high sound pressure level (115dB SPL at 1m).
12“ Subwoofer (paper)
Amp. Power RMS / Music: 200 W / 300 W
Frequency Response: 22 Hz - 150 Hz
Max. peak SPL at 1 m: ≥115 db
Gallery
This is the front view
This is the back view
360 Degree View
Backplate printing may vary in different countries.
Technical Data
View the specifications of the ADAM Audio Sub12 by clicking each drop-down section.
- General Data
- Panel: Rear
- Weight: 57.3 lb (26 kg)
- Height x Width x Depth: 23.5″ (600 mm) x 14″ (360 mm) x 17.5″ (450 mm)
- Warranty: 5 years (2 years warranty plus 3 years optional with product registration)
- Delivery Contents: Power cord, manual
- Audio Input Connectors
- Analog: XLR /RCA
- Input Impedance: 10 kOhm
- Amplification
- Type: PWM
- Amp. Power RMS / Music: 200 W / 300 W
- Acoustics
- Frequency Response: 22 Hz – 150 Hz
- THD > 60 Hz: ≤1 %
- Max. peak SPL at 1 m: ≥115 dB
- Crossover Frequencies: 50 – 150 Hz
- Driver
- Basket Diameter: 12″
- Voice Coil Diameter: 2″ (50 mm)
- Cone Material: Paper
Additional information
Read up on the user manual, the quick start guide or take a look at the product sheet.
