Sub10 MK2
SubwooferBuy nowADAM Audio Sub10 MK2
The Sub10 MK2 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 25Hz.
A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.
The Sub10 MK2 subwoofer provides a precise combination of low cutoff frequency (-3 dB at 25Hz) and an undistorted high sound pressure level (113dB at 1m).
10“ Subwoofer (paper)
Amp. Power RMS / Music: 200 W / 300
Frequency response: 25 Hz - 150 Hz
Max. peak SPL at 1 m: ≥113 db
Gallery
This is the front view
360 Degree View
Backplate printing may vary in different countries.
Technical Data
View the specifications of the ADAM Audio Sub10 MK2 by clicking each drop-down section.
- General Data
- Panel: Rear
- Weight: 46.3 lb (21 kg)
- Height x Width x Depth: 22″ (560 mm) x 12″ (300 mm) x 15.5″ (400 mm)
- Warranty: 5 years (2 years warranty plus 3 years optional with product registration)
- Delivery Contents: Power cord, manual
- Audio Input Connectors
- Analog: XLR /RCA
- Input Impedance: 10 kOhm
- Amplification
- Type: PWM
- Amp. Power RMS / Music: 200 W / 300 W
- Acoustics
- Frequency Response: 25 Hz – 150 Hz
- THD > 60 Hz: ≤1 %
- Max. peak SPL at 1 m: ≥113 dB
- Crossover Frequencies: 50 – 150 Hz
- Driver
- Basket Diameter: 10″
- Voice Coil Diameter: 2″ (50 mm)
- Cone Material: Paper
Additional information
Read up on the user manual, the quick start guide or take a look at the product sheet.
